This shows you the differences between two versions of the page.
— |
gnucap:manual:measure:slope [2015/12/11 15:39] (current) |
||
---|---|---|---|
Line 1: | Line 1: | ||
+ | ====== "slope" measure ====== | ||
+ | |||
+ | ===== Purpose ===== | ||
+ | |||
+ | Find the slope or slew rate of a waveform. | ||
+ | |||
+ | ===== Syntax ===== | ||
+ | |||
+ | slope(probe="p(d)" initial=value final=value begin=time end=time expression) | ||
+ | |||
+ | ===== Parameters ===== | ||
+ | |||
+ | ^arg name ^default ^description ^ | ||
+ | |probe |required |The name of a probe to measure. | | ||
+ | |initial |0 |The initial value. | | ||
+ | |final |0 |The final value. | | ||
+ | |begin |-infinity |The window begins at this time or frequency. | | ||
+ | |end |+infinity |The window ends at this time or frequency. | | ||
+ | |first |true |Find the first crossing in the window. (Cancels last.) | | ||
+ | |last |false |Find the last crossing in the window. (Cancels first.) | | ||
+ | |expression |false |The result is an unreduced expression. | | ||
+ | |||
+ | ===== Comments ===== | ||
+ | |||
+ | Ordinarily, the result is a number. If the probe is a voltage probe the units would be volts per second. | ||
+ | |||
+ | If the "expression" keyword is given the result is an unreduced expression. | ||
+ | |||
+ | ===== Examples ===== | ||
+ | |||
+ | measure sr = slope(probe="v(out)" initial=-2 final=2 last) | ||
+ | Find the slope (slew rate) for the last transition from -2 to 2, as a number. | ||
+ | sr= 30.15738K | ||
+ | |||
+ | measure sr = slope(probe="v(out)" initial=-2 final=2 last expression) | ||
+ | Find the slope (slew rate) for the last transition from -2 to 2, as an unreduced expression. | ||
+ | sr={( 2.--2.)/( 0.001066319- 933.6812u)} | ||